• Automatic analysis of patient ECG.
  • User guide with text and voice prompts.
  • 320 X 240 graphic LCD display.
  • Versatile Power Supply, rechargeable battery pack and AC adapter standard.
  • Car cigar lighter jack power cord and disposable battery pack optional.
  • Battery has capacity of 200 shocks when fully charged.
  • Rescue data collected is stored in internal flash memory.
  • Rescue data can be downloaded for review, archiving and printing.

Automatic self tests, prompts and alarms given if device fails self tests.





ECG Function

– Patient connection: Defibrillation Pads, ECG Electrodes.

– Bandwidth: Monitoring Mode: 0.3 to 40Hz (-3dB)

                     EMS Mode – 1~30Hz

– ECG size: 5,10, 20mm/mV display on monitor ( Auto scaling)

– Heart rate: Digital 30 to 300 bpm (±2%)


– Operation mode: Semi automatic

– Waveform: e-cube biphasic (Truncated exponential type)

– Energy: 150J into 50Ω load (default setting)

          Preprogrammed selection (150J-150J-180J,150J-180J-180J)

– Charging time: Less than 10 seconds

– Recognition: Sensitivity and Specificity = 99.5%

– Detection Level: > 0.1mV ECG

– Defibrillation Electrodes: Multifunction electrodes (Disposable)

                                    Adult adhesive pads (pre-gelled)

Voice and Text Prompts

– Voice and text prompts guide the user through the protocol

– All the user interfaces are supported in local language for easy use.

Data Storage & Management

– Internal flash memory: 10 hours of event and ECG recording

– SmartMedia Card (32M): 48 hours of event and ECG recording or 1 hour if voice recording is enabled.

Automated Self-Test

– Power On Self-Test / Run Time Self-Test / Manual Test

– Periodic Self-Tests (daily / weekly / monthly)


– Screen Type: High resolution display (graphic LCD)

– Screen size: 4 inches diagonal, 320×240 pixels

– Sweep speed: 25mm/sec, nominal

– Viewing time: 3.2 seconds


– Size: 305mm x 250mm x 95mm (L x W x H)

– Weight: Approximately 2.8Kg

– Galvanic Protection: BF type

AC Adaptor

– Input: 100 ~ 240V AC 50/60Hz 1.2A  – Output: + 12VDC, 3.5A

Battery Pack

– 12V Nickel-Metal Hydride battery pack (rechargeable)

– Charging time: Minimum of 4 hours for full charging

– Capacity: when new, minimum of 200 shocks deliveries (fully charged)

External Link

– UART port  – IrDA port

Package Contents

Device, 1 Sets of pads, 1 Power Cord, 1 AC Adapter, 1 Long Life NI-MH battery, 1 Operator’s Manual, 1 Quick Reference Card, Carrying Case

Optional Accessories

– Car Cigar Lighter Jack Power Cord

– SmartMedia Card (32M)

– External Thermal Printer (wire) and paper

– UART Cable / ECG Cable (3 lead) / ECG Electrodes.


Your Shopping cart